Pontiac GTA Enhancement information and discussions with Technical DIY and performance tuning information for the hardcore Pontiac GTA Owners and Enthusiasts.
Forum | Register Now | Members | Search | How Do I... | Calendar

Go Back   The GTA Source Page Message Forums > GTA SPECIFIC > GTA TECH

GTA TECH Want to discuss technical topics about your GTA.... engine tuning, mechanical upgrades, problem areas, etc.? Then post it HERE!

Reply
 
Thread Tools Display Modes
Old 08-29-2007   #1
torqueaddict
Registered User
 
Join Date: Feb 2006
Posts: 19


can I reuse rubber/plastic GM Vortec intake/head gaskets?

I'm doing a TPI Vortec head swap on my 89 GTA, and I am retaining the stock exhaust manifolds. (for cost reasons)

I need to remove the passenger side head and put it back. (engine never started since install) I'm using the factory GM plastic/rubber (or whatever they are) Vortec gaskets. Can they be reused? I am also guessing I can reuse the GM Vortec intake gasket?

I was assembling my TPI Vortec w/SD intake and realized I needed to take one of the heads off to tap a bolt hole since the L98 heads have an extra exhaust manifold bolt hole - the passenger side uses the outer bolt hole that the driver side does not use.

thanks.
torqueaddict is offline   Reply With Quote
Old 08-29-2007   #2
FrankieRider2
Site Administrator
 
FrankieRider2's Avatar
 
Join Date: Oct 2000
Location: North Central Arkansas
Posts: 2,233



GTA Year: 1988
GTA Engine: 350 TPI Automatic
Re: can I reuse rubber/plastic GM Vortec intake/head gaskets?

Well, my local GM parts guru says they can be reused as long as they are undamaged. But he said he has never heard of any customers actually doing it. The Vortec VC gaskets from GM are about $20 per side.
__________________
Frankie Rider, 2
Administrator
The GTA Source Page

E-Mail
FrankieRider2 is offline   Reply With Quote
Old 08-29-2007   #3
FearThisGTA
"The only thing to fear is.............fear itself"
 
FearThisGTA's Avatar
 
Join Date: Jun 2003
Location: In front of you....
Posts: 4,742



GTA Year: 1991
GTA Engine: 350 TPI Automatic
Re: can I reuse rubber/plastic GM Vortec intake/head gaskets?

^what Frankie said, but IMO, spent he $$ and just get some more. Some times a piece of mind is worth the extra $$$.
__________________


Cliff Jones
1991 GTA Trans Am
w/305,231 miles
on the original motor!!!!
Time of Death on motor, 4:07pm on 05/29/2010.
Hp:211.2@4200rpms/Tq.328.5@2700rpms
Best et: 13.959@97.05mph
Best mph: 98.3
Best 60' : 1.875 on BFG Comp TA's w/ 32 lbs of air in them
FearThisGTA is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Center cap GM part number? Aftermarket any good? Whats' the best to use and where? PhillyTurboSix GTA PARTS WANTED 4 02-11-2007 04:20 PM
rare GM NOS RUSSET fender emblem Kenwood GTA PARTS FOR SALE 0 04-26-2005 07:25 PM
Vortec intake MY91Y84 GTA TECH 0 07-18-2002 08:11 PM
water pump gaskets f-crazy GTA TECH 3 11-23-2001 11:42 PM
Vortec Heads? REMOVED USER GTA TECH 1 06-13-2000 06:41 PM


All times are GMT -5. The time now is 06:05 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.