Pontiac GTA Enhancement information and discussions with Technical DIY and performance tuning information for the hardcore Pontiac GTA Owners and Enthusiasts.
Forum | Register Now | Members | Search | How Do I... | Calendar

Go Back   The GTA Source Page Message Forums > GTA SPECIFIC > GTA TECH

GTA TECH Want to discuss technical topics about your GTA.... engine tuning, mechanical upgrades, problem areas, etc.? Then post it HERE!

Reply
 
Thread Tools Display Modes
Old 03-19-2015   #1
Roadrunner
87 GTA 305 Auto
 
Join Date: Feb 2010
Location: Cincinnati Ohio
Posts: 148


Molded Heater hoses

My car is missing the metal pipe that runs along the frame rail that goes from heater to oil cooler and bypass valve.
It has somewhat of a spaghetti mess of straight rubber hoses replacing it.

I am getting ready to replace the heater core and I have a used metal pipe that I am going to install so I can put hoses back like original.
Can someone help confirm molded hoses that I need?

From Rock auto I see I need the following

Heater Hoses:
1. ACDELCO Part # 14175S {#88907172} Professional|Molded; 13/16" x 9-13/32" Heater To Pipe-1; FI; Cut to fit


2. ACDELCO Part # 18054L {#88907494} Professional|Molded; 5/8" x 26 11/16" Heater To Valve; FI; w/A.C.


Bypass:
3. ACDELCO Part # 16155M {#88907395} Professional|Molded; 3/4" x 21 11/16" Pipe-1 To Valve; FI; W/A.C.



My main question is in regard to oil cooler.
4. Is there a molded rubber hose connecting heater/bypass metal pipe to oil cooler metal pipe?
5. Is there a molded rubber hose going from oil cooler return metal pipe to radiator?
Or is it that these are just cut from straight hose?
Roadrunner is offline   Reply With Quote
Old 03-24-2015   #2
90 L98 TransAm
Registered User
 
Join Date: Mar 2006
Posts: 468


Re: Molded Heater hoses

I replaced most of my hoses nine years ago using the Goodyear Super-Hi Miler Kit for '87 - '92 5.0L and 5.7L Firebirds and Camaros (#5002). If you can get over the royal blue color of the hoses this is one option. they are still available on the auction sites for less than they cost back in the day. take a look at a picture of the hoses in the kit as it may help you figure out what you need. Goodyear used to have some helpful info on coolant hoses needed for particular vehicles but I can't find the site anymore.

I can't recall if the short factory hoses that connect the oil cooler to the hard pipes were molded or not but the Goodyear kit uses short section of straight hose. the kit includes a 6" section of 5/8" heater hose which I suspect is for the oil cooler connections.

and while you are replacing the oil cooler hoses you might want to consider replacing the oil cooler gasket. for my car it was GM #14087586. they are selling on the auction sites for ~$44 (a nice profit for someone!). and there may be aftermarket gaskets available also at a more reasonable price.

consider taking a few pictures and making a thread on hose replacement as it will help others in the future.
90 L98 TransAm is offline   Reply With Quote
Old 03-25-2015   #3
TTOP350
Registered User
 
Join Date: Jan 2011
Posts: 276


Re: Molded Heater hoses

Yes, the oil cooler rubber hoses are molded, all 4 of them.
TTOP350 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Would AC still work with no heater control valve? quickbird144 GTA TECH 1 06-03-2013 04:26 PM
Heater Control Valve Vacuum, not getting any? quickbird144 GTA TECH 1 06-12-2012 09:49 AM
Formed coolant/air hoses djmarch GTA PARTS WANTED 0 08-30-2010 07:12 PM
Is this heater hose arrangement correct? Roadrunner GTA TECH 9 06-10-2010 07:37 PM
heater hoses brp88transam GTA TECH 8 10-15-2005 01:12 PM


All times are GMT -5. The time now is 05:54 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.