Cut-out worth the squeeze

GTA_340 · 12-18-2005

hi i had recently put a post out on a header install i will be doing, and at the same time i was thinking of getting a cut-out for my exhaust. i was wondering if 1. its worth it or not for the 200+ dollars i'd have to spend. 2. how big of a hp gain could i expect when its wide open and 3. will it sound cool or what? im basically looking for peoples opinions who have or have heard and seen them in action, and also should i go for the electric cut-out or not? any feedback is appriciated thanks.

FearThisGTA · 12-18-2005

Get the headers. As far as hp, well it will depend on who's you get but tipically you see arond 10-15 hp. And cut-outs are cool and they woork well esp if you are goin to the track.

nblanchard · 12-18-2005

are you getting the electronic cutout valve for it?? stacey installed two of them on the copperhead truck

12-18-2005	#1
GTA_340 Registered User Join Date: Aug 2004 Posts: 45	Cut-out worth the squeeze hi i had recently put a post out on a header install i will be doing, and at the same time i was thinking of getting a cut-out for my exhaust. i was wondering if 1. its worth it or not for the 200+ dollars i'd have to spend. 2. how big of a hp gain could i expect when its wide open and 3. will it sound cool or what? im basically looking for peoples opinions who have or have heard and seen them in action, and also should i go for the electric cut-out or not? any feedback is appriciated thanks.

12-18-2005	#2
FearThisGTA "The only thing to fear is.............fear itself" Join Date: Jun 2003 Location: In front of you.... Posts: 4,742 GTA Year: 1991 GTA Engine: 350 TPI Automatic	Re: Cut-out worth the squeeze Get the headers. As far as hp, well it will depend on who's you get but tipically you see arond 10-15 hp. And cut-outs are cool and they woork well esp if you are goin to the track. __________________ Cliff Jones 1991 GTA Trans Am w/305,231 miles on the original motor!!!! Time of Death on motor, 4:07pm on 05/29/2010. Hp:211.2@4200rpms/Tq.328.5@2700rpms Best et: 13.959@97.05mph Best mph: 98.3 Best 60' : 1.875 on BFG Comp TA's w/ 32 lbs of air in them

12-18-2005	#3
nblanchard GTA Member Join Date: Oct 2001 Location: North York, ON Canada (Toronto) Posts: 870	Re: Cut-out worth the squeeze are you getting the electronic cutout valve for it?? stacey installed two of them on the copperhead truck __________________ Best Track Time is 14.396 @ 95.71MPH 225.5hp @ 4250rpm (at the wheels) 325.8ft-lbs @ 3250rpm (at the wheels)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTA Walks tall in Ft. Worth All F-Body Show......	TX_1987_GTA	GTA NON-TECH	4	04-13-2005 12:40 AM
What is my car worth?	89tagta	GTA NON-TECH	2	12-26-2004 07:30 PM
Mods to squeeze all the hp I can get!	89tagta	GTA TECH	12	07-21-2004 04:29 PM
How much will my GTA be worth?	gmendoza	GTA DOCUMENTATION/RESEARCH	5	11-20-2003 03:06 AM
Is the a speed cut off on the 88 and 89 GTAs	MRPITTSII	GTA NON-TECH	3	03-20-2002 02:12 PM