Pontiac GTA Enhancement information and discussions with Technical DIY and performance tuning information for the hardcore Pontiac GTA Owners and Enthusiasts.
Forum | Register Now | Members | Search | How Do I... | Calendar

Go Back   The GTA Source Page Message Forums > GTA SPECIFIC > GTA TECH

GTA TECH Want to discuss technical topics about your GTA.... engine tuning, mechanical upgrades, problem areas, etc.? Then post it HERE!

Thread Tools Display Modes
Old 03-10-2001   #1
Posts: n/a

You Gotta Read This!

Ladies and Gentleman,
I just found out that Scoggin-Dickey Chevrolet (800-456-0211) will release an intake to allow a bolt-on of Vortec heads to our cars. These will be manufactured by Edelbrock under liscense by S.D.C. The cost will be about $400 (at least that's what Jason in parts tells me) and will hit the streets in about four weeks.

Doug Herbert Performance (800-444-7373) is offering brand new roller cams for our cars at a cost of $179 with several grinds available. I ordered a spec sheet on the CC6P (498/484 lift & 226/217 Dur @ .50) to see how the profile maps out. Anyone running this cam yet?

  Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 09:55 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.